After 10 minutes put the batteries back into the transmitter first, and then immediately into the clock.Bring the transmitter inside and take the batteries out of the clock and out of the transmitter for 10 minutes.To reconnect the clock and the transmitter: If your outside temperature is not showing on your clock, that may mean that the clock and the transmitter have lost their connection. To stop the clock from counting seconds, press the plus (+) button until none of the displays are counting seconds. If you push the plus (+) button when a function is not flashing, your clock will start counting seconds in the indoor or outdoor temperature or day of the week display. Note: If you live in Arizona please set your time zone to -7 MST and turn your DST to OFF. Press the plus (+) button to change between oF for Fahrenheit and oC for Celsius. Press SET 11 times: Temperature: The time will read oF or oC.Press the plus (+) button to change between 12 for regular time or 24 for military time. Press SET 10 times: Military: The minute display will read 12 or 24.Press SET 9 times: Day of week will flash: Press the plus (+) button to change the day of week.Press SET 8 times: Day will flash: Press the plus (+) button to change the day.Press SET 7 times: Month will flash: Press the plus (+) button to change the month.Press the plus (+) button to change to the proper 2-digit year. Press SET 6 times: Year: The day of the week will change to two numbers.Press SET 5 times: Minutes will flash: Press the plus (+) button to change the minutes.Press SET 4 times: Hour will flash: Press the plus (+) button to change the hour.Press the plus (+) button to change to US (or U5) for English. Press SET 3 times: Language: The time will change to a letter.Press the plus (+) button to change between ON and OFF (if you observe DST it must be ON – even in the winter). Press SET 2 times: Daylight Savings (DST): The time will change to ON or OFF.If you have the number without a minus sign, keep pressing the + button until you see the abbreviation of your time zone in the day of week display, a minus sign in the month display, and your time zone number in the day display. The US time zones must have a minus sign. Press the plus (+) button to change to the proper time zone Press SET 1 time: Time Zone: The time zone will flash in the date display.Then press and release the PLUS (+) button while still flashing to change to the desired setting.Press and release the SET button as many times as indicated until the function you wish to change begins to flash.If you want to change any of the functions, follow the simple instructions below. All of the other functions are already programmed. Please note that the ONLY function you need to program is the time zone if you do not live in the Eastern time zone. If you have a different model, please refer to the manual by clicking here: If you have the digital 4-button (SET, +, ALM, SNZ) model clock, you may use the following instructions to set your clock. HELPFUL INFORMATION ABOUT YOUR SKYSCAN DIGITAL ATOMIC CLOCK
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |